ENHET / TVALLEN Open wash-stand with 2 shelves, white/Glypen tap, 64x43x65 cm
Sale!

ENHET / TVALLEN Open wash-stand with 2 shelves, white/Glypen tap, 64x43x65 cm

$88.00

391 in stock

SKU: BR239 Category:

Description

Product details

The open wash-basin frame gives easy access to towels and baskets and creates a more spacious feeling than closed storage.

Smooth, durable and easy-to-clean ceramic wash-basin with space for toothbrushes, soap dispenser and other smaller things on the wide back edge.

You save water and energy every time you lift the lever of the mixer tap thanks to the aerator device that prevents unnecessary use of water.

Cleaning the floor is a breeze since this combination is wall-mounted.

Powder coated and galvanised steel withstands many years of use in environments exposed to water, splashes and humidity.

The unique wedge dowels make assembly easy and the fittings are nearly invisible.

ENHET hooks are perfect for hanging towels or accessories and slide easily into to the grooves under the open ENHET wall frame or on the side of the washbasin frame.

  • Comprises: 1 base frame for wash-basin, 1 wash-basin, 1 mixer tap, 1 water trap and strainer and 2 hooks.

    Mixer tap and strainer are included.

    Secure that the material in your bathroom walls can support the weight of the furniture. If you are uncertain about the installation, contact a professional.

    Two persons are needed for the assembly of this furniture.

    Ceramic wash-basins are kiln-fired, which makes each one unique and the size may vary slightly from the measurements given.

    Water-trap is included.

    The material in this product may be recyclable. Please check the recycling rules in your community and if recycling facilities exist in your area.

  • Material

    Base frame for washbasin

    Tubes:
    Steel, Powder coating
    Shelf:
    Galvanized steel, Powder coating
    Wedge:
    Steel, Epoxy/Acrylic coating
    Single wash-basin

    Ceramics, Coloured glaze
    Hook

    Stainless steel, Powder coating
    Water trap, 1 bowl

    Water trap frame/ Cleaning plug/ Cover cap/ Outlet pipe/ Outlet connector:
    Polypropylene plastic
    Sealing ring/ Gasket/ Seal:
    Synthetic rubber
    Waste pipe:
    Polypropylene plastic, Synthetic rubber
    Strainer:
    Stainless steel
    Seals:
    Polyethylene foam
    Assembly tool:
    ABS plastic
    Mixer tap

    Body:
    Zinc, Metallized
    Inner body:
    Reinforced polyamide plastic
    Spout:
    Brass, Metallized

    Care

    Hook

    Wipe clean with a mild soapy solution.

    Wipe dry with a clean cloth.

    Base frame for washbasin

    Wipe clean with a mild soapy solution.

    Wipe dry with a clean cloth.

    Wet marks should always be dried off as soon as possible to stop moisture penetration.

    Mixer tap

    Wipe dry with a clean cloth.

    Single wash-basin

    Wipe clean with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.

    Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the washbasin.

  • This furniture must be fixed to the wall with the enclosed wall fastener.If you are uncertain about the strength of your bathroom walls we recommend that you use legs.
  • Assembly instructionsENHET Hook004.657.54R?NNILEN Water trap, 1 bowl404.224.04ENHET Base frame for washbasin404.644.70TV?LLEN Single wash-basin504.508.25GLYPEN Mixer tap904.940.40
    Other documentsENHET Base frame for washbasin404.644.70TV?LLEN Single wash-basin504.508.25GLYPEN Mixer tap904.940.40

TECHNICAL INFORMATION

ENHET / TV?LLEN

Open wash-stand with 2 shelves

Type of mixer tap Kitchen mixer tap Applicable product standards EN 817 Max. flow rate at 3 bar 5.5 l/min (1.5 gpm) Max. static pressure 10 bar (145.0 psi) Tested up to a max. static pressure 16 bar (232.0 psi) Min. working pressure 0.5 bar (7.25 psi) Recommended working pressure 1-5 bar (14.5-72.5 psi) Max. hot water temperature 80?C (176?F) Recommended hot water temperature 60-65~C (140-150~F) Recommended cold water temperature 10-15?C (50-59?F) Connection hoses length 450 mm (17 3/4 '') Hose connection size G1/2" Max. worktop thickness 50 mm (2'') Mounting hole measurement 34-37 mm (1 3/8-1 7/16§) Strainer included No

Shipping is FREE for all orders!

SHIPPING TIME:

All orders made before 12:00 on Monday – Friday (excluding public holidays) will be sent out on the same day.
Any orders made after 12:00 pm on Monday – Thursday (excluding public holidays) will be sent out latest, the morning after your order.
Orders made on a Friday after 12:00 will be sent out on the following Monday.
Orders made on a Public Holiday will be sent out on the next working day.
Orders generally take 2-3 working days to be delivered.

Returns

Within 30 Days – You must return your product within 30 days of the product being purchased:
Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.